1-Wire Interfaces
1-Wire Products
Maxim Integrated (5 Products)
DS9097U-009#
1-Wire COM Port Adapter with ID-Chip
- True-Ground Interface to an RS232 COM Port for Reading and Writing 1-Wire Devices
- Works with Bipolar as well as Unipolar Logic Signals
- Compatible to COM port of (±)5V to (±)12V
DS9097U-E25#
1-Wire COM Port Adapter DB-25
- True-Ground Interface to an RS232 COM Port for Reading and Writing 1-Wire Devices
- Works with Bipolar as well as Unipolar Logic Signals
- Compatible to COM port of (±)6V to (±)12V
DS9097U-S09#
1-Wire COM Port Adapter
- True-Ground Interface to an RS232 COM Port for Reading and Writing 1-Wire Devices
- Works with Bipolar as well as Unipolar Logic Signals
- Compatible to COM port of (±)5V to (±)12V
Only a few pieces left!
DS9490B#
USB to iButton Adapter
- High-Speed 12Mbps Universal Serial Bus (USB) Interface
- Supports Standard and Overdrive 1-Wire® Communication
- Slew-Rate-Controlled 1-Wire Timing and Active Pullup for Improved 1-Wire Network Performance
DS9490R#
USB to 1-Wire Adapter
- High-Speed 12Mbps Universal Serial Bus (USB) Interface
- Supports Standard and Overdrive 1-Wire® Communication
- Slew-Rate-Controlled 1-Wire Timing and Active Pullup for Improved 1-Wire Network Performance
iButtonLink (9 Products)
Link45
Advanced 1-Wire COM Port Adapter
- Support for Extended Mode slaves
- FxB protocol slaves and 1-Wire translated slaves running under FxB.
- Page read commands during binary ("b") mode.
Link45i
Advanced 1-Wire COM Port Adapter with ID-Chip
- Support for Extended Mode slaves
- FxB protocol slaves and 1-Wire translated slaves running under FxB.
- Page read commands during binary ("b") mode.
LinkUSB-T
Advanced 1-Wire USB Adapter with Screw Terminal
LinkUSBi
Advanced 1-Wire USB Adapter with ID-Chip
Temporarily out of stock
Eclo (1 Product)
COM to 1-Wire USB Adapter
USB to 1-Wire Adapter
- Replacing current RS-232 COM adapters
- Expanding the number of available 1-Wire ports
- Software licensing or asset identification through the built-in DS2401 ID chip
EDS (3 Products)
HA7Net
Ethernet 1-Wire Host Adapter, Panel Mount
- Simple command support for all 1-Wire devices
- Configurable security levels: Secure 128 bit SSL Encryption
- Manages concurrent client connections safely and reliably
OW-SERVER-ENET
1-Wire to Ethernet Server (Rev. 2)
- Real-Time Graphing and Logging through Web Browsers.
- Reads all active devices every 2 seconds
- Firmware can be flash upgraded from remote
OW-SERVER-WIFI
1-Wire to WiFi Server (Rev. 2)
- Real-Time Graphing and Logging through Web Browsers.
- Reads all active devices every 2 seconds
- Firmware can be flash upgraded from remote
