The 1-wire distributor 7-fold is designed for DIN-Rail mounting (TS15 and TS35). Up to seven 1-wire devices can be easily connected to the distributor via push-in terminals. A RJ45 female connector provides fast and reliable connection to the 1-wire network.
All ports are switched in parallel. A decoupling capacitor on the +5V line reduces noise on connected circuit.
Pin Assignments RJ45 Jack (Front)
| Pin 1 | GND |
| Pin 2 | +5 volts (Vdd) |
| Pin 3 | GND |
| Pin 4 | 1-Wire data |
| Pin 5 | 1-Wire GND |
| Pin 6 | NC |
| Pin 7 | +12 volts |
| Pin 8 | GND |
Caution
Never use this module with pluggable devices from manufacturer Embedded Data Systems or any other manufacturer that do not comply with the Pin Assignments above. Failure to comply will result in damage to the device.
